Element supports operators of landfills and waste management companies with monitoring the migration of gases to prevent a negative impact on environmental and human health. We collect and analyze samples of carbon dioxide and methane from landfills and other nearby sources.
Biogenic gases produced at landfill sites are primarily composed of methane and carbon dioxide, with trace amounts of other organic vapors and gases. The quantities of these gases vary over time, and change under different operational conditions. Released into the atmosphere, they can have a negative impact on environmental and human health.
Migration from methane and carbon dioxide
Element can help you to take a proactive approach to prevent subsurface migration of landfill gases. With regular checking of perimeter wells we can establish whether your gas control system and liner are performing correctly. Ideally, the methane values at perimeter wells should be below 1 percent and carbon dioxide below 1.5 percent. If these compliance levels are approached or exceeded, we can identify the reason. In many cases, elevated values can be attributed to other sources, such as nearby coalmines.
To help you determine the right management process, we sample to establish the exact breakdown of the migrating gases. We perform fingerprinting of both methane and carbon dioxide by investigating the isotope ratios. These ratios can help to identify whether:
- the origin of the detected perimeter gas is likely to be biogenic (biologically derived) or thermogenic (natural mains gas, mine gas, marsh gas or sewer gas), and
- whether soil, bacteria, stone degassing etc. are contributing.
We can also install subsurface analysers to record gas concentrations over time, and use trace compounds and radio-isotopes to pinpoint the age of the gaseous material (whether it’s recent or ancient). C12, C13, and C14 isotopes can all be investigated.
Landfill gas monitoring - The Element advantage
Our testing laboratories are accredited to the international standard ISO/IEC 17025 to ensure our clients have complete confidence in accurate and reliable test results. Offering a fully UKAS accredited sampling and analysis service, Element’s environmental laboratories in the UK can support customers to evaluate the levels of methane, carbon dioxide and trace gases migrating from their landfill. We also provide advice on remedial actions, if the source was the landfill.
To learn more about our landfill gas monitoring services or speak to one of our experts, contact us today.
Ambient Air Quality Modeling and Dispersion
Find out how we help our customers comply with regulations for ambient air quality and dispersion modeling.
Find out how we help our customers comply with all relevant UK stack emissions regulations with fugitive emissions monitoring for airborne particulates.
Stack Emissions Testing
Find out how our stack emissions testing services help our customers to prevent exposure, reduce emissions, improve air quality and achieve regulatory compliance for the industrial installations they operate.
Diesel Engine Exhaust Emissions Testing
Element examines the quantity and composition of Diesel Engine Exhaust Emissions (DEEE) to support our clients to reduce the exposure.
Medium Combustion Plant Directive
Element supports clients in the UK and Ireland with emission testing to demonstrate compliance with MCPD and give guidance throughout the permitting process.
Indoor Air Quality Assessments
Find out how our qualified occupational hygienists can assess indoor air quality looking at chemical, physical, and biological parameters to help our customers comply with regulations.
Find out how Element helps our customers to comply with the UK Environment Agency’s Technical Guidance Note M2 to minimize exposure to bioaerosols.
Find out how we apply our 90 years of experience to help our customers to consistently meet the increasingly complex environmental obligations they face in the Americas, Europe and the Middle East.