Case study

AGDC

Exova (now owned by Element Materials Technology) signed a contract with the Alaska Gasline Development Corporation (AGDC) to provide a material and weld qualification programme for AGDC's ASAP project, which also involves qualifying selected pipe mills and welding contractors specified by AGDC.

Airbus case study
Case Study

Airbus

Exova Bridgwater (now owned by Element Materials Technology) worked closely with Airbus in Filton, Gloucestershire, in order to gain group approval to perform Tg testing as part of aerospace production release checks on critical components.

Alstom Power case study
Case study

Alstom Power Limited

Exova (now owned by Element Materials Technology) developed a fire safety strategy and undertook a number of bespoke fire risk assessments and fire system installation audits on behalf of Alstom Power Limited for two new gas fired power stations.

Bavaria case study
Case Study

Bavaria Yachtbau

Exova Warringtonfire Frankfurt (now owned by Element Materials Technology) expanded its fuel tank testing capaabilities in response to increasing demand in the marine sector through a project with Bavaria Yachtbau, one of Europe's largest yacht manufacturers.

Chevron Case Study
Case Study

Chevron

Exova (now owned by Element Materials Technology) delivered a comprehensive range of oil pipeline weld testing services utilizing the latest Ultrasonic Testing (IUT) procedures for Chevron, one of the world’s leading oil companies.

Doha Metro case study
Case Study

Doha Metro

The new Doha Metro is currently under construction with phase one on course to open in 2019. On completion in 2026, the new system will consist of four lines, covering 132 miles and serving 85 stations.

Dubai Metro case study
Case Study

Dubai Metro

Exova (now owned by Element Materials Technology) was approached to help test the infrastructure for the first ever metro system in Dubai. The project included 75km of track, including 5km of tunnels, and 47 stations both above and below ground.

Fisker case study
Case Study

Fisker

Exova (now owned by Element Materials Technology) was contracted to help develop an Advanced Development Validation (ADV) plan for the interior of the vehicle, and manage through two development cycles including Design Validation (DV) and Process Validation (PV).

GKN case study
Case Study

GKN

Exova (now owned by Element Materials Technology) has long supported GKN, a leading supplier in the global aerospace supply chain, providing technically demanding solutions in support of the development and application of composite materials.

Hitachi Rail Europe case study
Case Study

Hitachi Rail Europe

Exova Warringtonfire (now owned by Element Materials Technology) provided fire testing of structural materials including coated steel, coated glass reinforced plastic, and interior upholstery and flooring materials for Hitachi Rail Europe Ltd (HRE).

Kaombo Project case study
Case Study

Kaombo Project

Exova (now owned by Element Materials Technology) was awarded a £2.5 million contract by CRC–Evans Offshore to provide pipeline material, welding and AUT qualification testing for the Kaombo Project.

MOSE Dam Project case study
Case Study

MOSE Dam Project

Exova Padova (now owned by Element Materials Technology) conducted over 150,000 tests for the world famous MOSE flood protection system for the city of Venice.

Rosetti Marino case study
Case Study

Rosetti Marino

Exova (now owned by Element Materials Technology) worked with Rosetti Marino on its development of the Jasmine discovery, a high pressure, and high temperature gas-condensate reservoir destined to produce 88000 barrels of oil in the North Sea every year.

Saab Grippen Fighter case study
Case Study

Saab Aerospace

Exova Linköping (now owned by Element Materials Technology) supported Saab with a full spectrum of testing and failure investigation services on the Gripen jet fighter.

Sherwin Williams case study
Case Study

Sherwin Williams

Exova (now owned by Element Materials Technology) provided testing services for a number of protective coatings used in dedicated seawater ballast tanks and cargo oil tanks on behalf of paint and coatings giant Sherwin-Williams.

Case Study

Subsea7

Exova (now owned by Element Materials Technology) a world-first, high-specification ‘laboratory in a box’ concept, which was shipped ready for on-site testing, offshore the Republic of Congo and Angola.

Tapco case study
Case Study

TAPCO

Exova (now owned by Element Materials Technology) won a five-year outsourcing deal with TAPCO to assume responsibility for all water testing performed on- and off-site and also for the provision of support and advisory services to ensure the quality of the drinking water produced on the plant.

United Utilities case study
Case Study

United Utilities

Exova (now owned by Element Materials Technology) provided a range of testing, inspection and advisory services via 14 fully equipped mobile laboratories to United Utilities in the UK.