Ultrasonic inspection (UT) is a non-destructive test method that utilizes sound waves to detect cracks and defects in parts and materials. It can also be used to determine a material’s thickness, such as measuring the wall thickness of a pipe. Because of the portability of the equipment and variety of methods available, ultrasonic testing allows for inspection of parts that are large, irregularly shaped, or unable to be transported.
Ultrasonic inspection relies on electronic transducers that transmit high-frequency sound waves to a material. These sound waves bounce back crystal-clear images, which reveal key characteristics about a material’s properties. The images created by ultrasonic testing can indicate cracks, weld grooves and fractures, as well as indicate material thickness and outline moving components.
Because this method has higher power potential than other non-destructive test types, ultrasonic inspection can produce images that are more clearly defined than other methods, and indicate characteristics deeper than surface level. Depending upon the test requirements, parts can be tested by immersion (in-lab testing) or contact (portable/in-air) inspection.
Ultrasonic testing is often used in situations where radiographic inspection is not possible, because it requires access to only one side of the test specimen.
Standards We Test To
American Metal Society
AMS-STD-2132, AMS-STD 2154, AMS 2630, AMS 2631, AMS 2632, AMS 2634
American Petroleum Institute
API STD 1104
American Society of Mechanical Engineers
ASME III, ASME Section V, ASME Section VIII
American Society for Non-Destructive Testing
NDT 5, NDT-UT-1001
ASTM A388, ASTM A435, ASTM A577, ASTM A578, ASTM B594, ASTM E114, ASTM E164, ASTM E213, ASTM E273, ASTM E317, ASTM E428, ASTM E587, ASTM E797, ASTM E2154, ASTM E2375, ASTM E2700
American Welding Society
AWS D1.1, AWS D1.5
Deutsches Institut Fur Normung E.V.
DIN EN 10160, DIN EN 10228-3, DIN EN 10228-4, DIN EN 10246-6, DIN EN 10306, DIN EN 10307, DIN EN 10308, DIN EN 12680-1, DIN EN 12680-2, DIN EN 12680-3, DIN EN 14127, DIN EN 583-4, DIN EN ISO 10893-10, DIN EN ISO 10893-11, DIN EN ISO 10893-12, DIN EN ISO 10893-8, DIN EN ISO 10893-9, DIN EN ISO 17640, DIN EN ISO 22825, DIN ISO 4386-1
International Electrotechnical Commission
MIL-STD-2132, MIL-STD-2154, MIL-STD-271F, MIL-STD-883, MIL-I-8950
Naval Sea Systems Command
National Aerospace Standard
NAS 410, NAS 824
Various Customer Specifications
Including Boeing, Bombardier, Cessna, GE, Hamilton Sunstrand, Honeywell, Northrop Grumman, Rolls Royce, etc.
Element's Unique Ultrasonic Inspection Capabilities
Element maintains full-service ultrasonic laboratories to offer in-house, onsite, and field inspections and certifications. Whether your inspection requirements are for raw materials or fracture-critical components, we offer the equipment, expertise, and capacity for the task.
Our laboratory areas feature a range of computer-controlled ultrasonic testing systems to accommodate inspections for test specimens of virtually any size.
For example, we offer:
- Turntable immersion tanks for components up to 6 feet in diameter
- A vertical ring rolling immersion system for components up to 12 feet in diameter
- Immersion tanks for plate, bar, and extrusion stock up to 36 feet long
- Tac Tic immersion line for pipe and bar
- Contact ultrasonic for large components, plate, bar, and field services
In addition, our UT services include data acquisition, strip chart recording, and C-scan inspections.
Comprehensive Non Destructive Testing Services
Element offers a complete range of NDT capabilities along with unparalleled expertise and worldwide capacity. Element’s NDT services can be provided both in the laboratory and at virtually any customer site across the US, UK, and Europe.
Ready to request a quote?
Our deliverable is certainty - high quality data, test reports and certificates that you can absolutely rely on when making decisions about your materials and compliance. Engage with an expert today.
More from Element
Element's NDT services are designed to comply with a wide variety of industry standards, government contracts, military specifications and unique customer requirements.
NDT Field Services
When employed at critical stages of the manufacturing or fabrication process, our NDE technicians work in the field to optimize production and ensure the quality of your finished product.
Rick has over 22 years of non-destructive testing experience in RT, UT, MT, PT and VT methods as well as test plan and protocol development.
Element Hamburg verfügt über eine umfangreiche Palette an Werkstoffprüfmöglichkeiten wie z. B. zerstörungsfreie Prüfung, zerstörende Prüfung, Metallographie, chemische Analyse und Korrosionsprüfung.