A dedicated test cell has been constructed specifically for this testing. Jet fuel is run through a large capacity clay bed to adjust the lubricity of the fuel. In order to check the lubricity of the fuel Element utilizes an 80,000.00 BOCLE (Ball on Cylinder Lubricity Evaluator) system. This allows on-site real-time testing of the fuel thereby expediting testing. In addition, Element can perform this testing with the fuel conditioned at extreme low or high temperatures.
The PCS Automated BOCLE System (ABS) is included in the D5001 ASTM specification.
Simple to use interface -microprocessor control of all instrument functions.
Standard ASTM D5001 test sequence pre-loaded into ABS microprocessor controller - operator fits cleaned specimens, adds fuel sample and presses the ‘Start Test’ button.
Automatic control of test sequence - no operator-induced variability in test results
Automatic flow controllers for moist and dry air - no operator input required to control the humidity and flow rate of the conditioned air.
Optional PC-based data logging software - allows test data to be recorded as a permanent record (available for both D5001 and D6078).
Interchangeable humidity and temperature probes - humidity and temperature measurement does not need to be re-calibrated - simply replace the combined relative humidity and temperature probe with an exchange pre-calibrated unit.
Ready to request a quote?
Our deliverable is certainty - high quality data, test reports and certificates that you can absolutely rely on when making decisions about your materials and compliance. Engage with an expert today.