It is critical to assess the quality of air to provide air pollution data to regulatory bodies, and to evaluate the effectiveness of pollution control strategies. Element provides an array of collection and analysis methods to cover all your air quality analytical needs.
Polluted air can be a danger to the population, leading to serious health risks and degradation of the environment. Element utilizes methods that determine the concentrations of various pollutants in air samples to ensure that the air is safe for humans and the environment.
The Element US laboratories are NELAC/TNI and ISO 17025 accredited, holding certification in LA and TX, and offer air quality monitoring services to EPA Method TO-15, and EPA Method 18.
The Element laboratories in the UK hold ISO 17025 accreditation for US EPA TO-15 analysis in evacuated canisters, BottleVacs and Tedlar bags.For more information on our air quality monitoring services, please contact us today.
EPA Method TO-15
Element offers sampling and analysis of ambient air to determine subsets of the 97 volatile organic compounds (VOCs) included in the 189 hazardous air pollutants (HAPs) listed in Title III of the Clean Air Act Amendments of 1990. Our analysis services can achieve reporting limits around one ppbv for all target compounds depending on the volume of air in the sample canister.
Samples should be collected in specially prepared canisters evacuated to approximately ~30 inches of Mercury. Samples may be collected as a grab sample or as a time-integrated sample by using a flow control device. TO-15 samples can be held for up to 30 days from collection to analysis.
EPA Method 18
Using EPA Method 18, Element can measure the total mass emissions of VOCs and determine compliance with the emission concentration limit. Method 18 allows for four different sampling options: Direct interface, dilution interface, adsorption tube, and Tedlar bag sampling. Element commonly uses Tedlar bag sampling for analysis conducted in the laboratory.
Element conducts Method 18 analysis via Gas Chromatography with Flame Ionization Detector (GC-FID) for samples collected in Tedlar bags. Element also conducts matrix spike recovery for each source to ensure the overall accuracy of measurements in the analytical procedure.
Samples should be collected in three or more Tedlar bags. Extra bags provide backup in case of leaks. SUMMA canisters are not allowed under Method 18. There is no technical holding time for Method 18 as long as the recovery study criteria are met.
Bulk Gas/Landfill Gas Analysis
Element UK laboratories offer analysis of bulk gases such as methane, carbon monoxide, carbon dioxide, oxygen, nitrogen and hydrogen. Element uses Gas Chromatography with Flame Ionization Detector (GC-FID) for this analysis.
Our laboratories can also determine the C1-C7 organic compounds methane, ethane, ethene, propane, pentane, hexane and heptane.
Analysis of Adsorption Tubes
Element UK can provide and analyse adsorption tubes by Thermal desorption GCMS. A variety of tubes (both pumped and passive) are available depending on the analysis required. Analysis includes TPH CWG, 56 VOC target compounds (including BTEX and Naphthalene), target chlorinated compounds or a screen for the top ten peaks.
Nearly 190 Years of Making Certain
More from Element
Find out how our ambient air quality testing solutions help our customers to systematically measure the pollutant levels of their operations and minimize their impact on the environment.
Environmental Compliance & Safety
Element’s industry-leading environmental compliance and safety services help our customers to demonstrate the highest possible standards of environmental compliance and socially responsible performance.
Indoor Air Quality Assessments
Find out how our qualified occupational hygienists can assess indoor air quality looking at chemical, physical, and biological parameters to help our customers comply with regulations.
Ambient Air Quality Modeling and Dispersion
Find out how we help our customers comply with regulations for ambient air quality and dispersion modeling.