Element in Aerospace
CASE STUDIES

Aerospace

Read our aerospace case studies to discover how the Digital Engineering team work with clients to maintain safety and increase efficiency within the sector.

Read our latest case studies
Integrity Assurance to Determine Additive Manufacturing Safety for Critical Components

Case study addressing additive manufacturing safety for critical components used within the nuclear and aerospace industries.

The danger of high altitude ice crystals to jet engine reliability

Learn how we used a CFD model to ensure the reliable operation of a jet engine encountering ice growth causing blockages at high altitude. 

building construction geotechnical investigation
CASE STUDIES

Built Environment

Read our case studies to learn how our Digital Engineering team helps develop, improve and strengthen construction processes, systems, and products, ensuring compliance, quality, and safety of a construction project.

Read our latest case studies
Calculating the danger of channeled wind on an urban development

Learn how numerical modeling and smart architecture practices reduced the danger of channeled wind on an urban development.

Using Computational Fluid Dynamics (CFD) in Architectural Planning
Solar and Wind Energy
Case studies

Energy

Read our case studies to learn how our Digital Engineering team has worked in partnership with energy companies to overcome complex challenges.

Read our latest case studies
Composite Repair Integrity for Offshore Pipeline Project

Case study on how we utilized Structural Reliability Assessment (SRA) to demonstrate the safety of composite repair on pipeline project to the client and regulator.

Using Hydrodynamic Modeling to Improve Power and Performance

Learn how Element Digital Engineering used a hydrodynamic model to improve the power and performance of an underwater Remotely Operated Vehicle (ROV).

Integrity Assurance to Determine Additive Manufacturing Safety for Critical Components

Case study addressing additive manufacturing safety for critical components used within the nuclear and aerospace industries.

Simulating Offshore Platform Data to Determine Trigger of Safety Release Valve

Read how we identified buckling pin failure as the cause of triggering safety release valve and leading to offshore platform shutdown.

Hydrogen Fuel Cell Explosion Risk Assessment

Learn how our Digital Engineering team used digital modeling to determine whether a fuel cell containment vessel would withstand a hydrogen fuel cell explosion.

Diverter Heat Exchanger Design for UK Atomic Energy Authority

Read how our team won the competition to design a diverter heat exchanger for the UK Atomic Energy Authority STEP program (Spherical Tokamak for Energy Production).

Flow Induced Vibration Accelerating Fatigue Failure in Piping Systems

Learn how Flow Induced Vibration (FIV) and Acoustic Induced Vibration (AIV) - induced by flow - accelerates fatigue failure in piping systems, and how we used computational fluid dynamics (CFD) to calculate fatigue lives for critical elements.

Predicting Component Life with Corrosion Modeling

Read how we utilized Computational Fluid Dynamics to accurately predict the location of the burn-through of pipe components and the time taken to failure.

Optimizing Separator Process Performance with Fluid Dynamics Modeling 

Read how our Digital Engineering team utilized digital modeling techniques to optimize performance when separating gases and liquids, for a company working within the oil and gas sector.

Stress analysis of low-cost, low-weight safety device used to deflect jet fires

Learn how Element Digital Engineering used fluid dynamics to perform stress analysis of low-cost, low-weight safety device required to deflect jet fires from leaking pipe flanges away from personnel and equipment.

fluid dynamics modeling
Case studies

Marine

Read our case studies to learn how our Digital Engineering team work alongside marine clients to overcome challenges in the harshest and most complex environments.

Read our latest case studies
Using Hydrodynamic Modeling to Improve Power and Performance

Learn how Element Digital Engineering used a hydrodynamic model to improve the power and performance of an underwater Remotely Operated Vehicle (ROV).

hydrodynamic modeling - digital engineering
Mining Equipment
Case studies

Mining

Read our case studies to learn how our Digital Engineering team has developed smart mining solutions to benefit the mining sector.

Read our latest case studies
Optimization of Rock Crushing Equipment 

Read our case study to learn how Element Digital Engineering has worked with a global mining company to optimize the design of their rock crushing machines.

Optimization of a Hydrocyclone Performance

Read our case study and discover how Element Digital Engineering has recently worked with a globally renowned mining company to optimize the performance of hydrocyclones.

Hydrocyclone CFD Modelling
C:\Users\pgabey\OneDrive - Element Materials Technology\Digital Engineering\Case Studies + White Papers\Case Studies\All Norton Straw Case Studies\images
CASE STUDIES

Transport

Read our case studies to learn how our Digital Engineering team work in partnership with rail sector clients to improve safety, optimize performance and reduce reliance on diesel engines.

Read our latest case studies
Route Assessment for Battery Powered Train

A major UK rail leasing company was looking to assess whether a large battery could provide the power to take an electric train along an unelectrified section of the line to eliminate diesel traction.

Digital Engineering Utilities
Case studies

Utilities

Read our case studies to learn how our Digital Engineering team work in partnership with clients in the utilities industry to optimize performance and lower emissions.

Read our latest case studies
Improving lamella clarifiers cleaning performance through CFD simulation

Read how we simulated a lamella clarifiers cleaning system with computational fluid dynamics (CFD) to optimize its performance.

Improving emissions performance within waste-to-heat process system

Learn how we used modeling and simulation to help develop a compact waste-to-heat process system, that minimized thermal stresses and maximized environmental emissions performance. 

Improving emissions for waste-to-heat system

Our team of over 6,000 Engaged Experts in North America, Europe, The Middle East, Australia, Asia and Africa are ready to help you.

Contact The Element Team