About Element Tinton Falls

Element Tinton Falls is a full-service environmental test facility with more than 15 different chambers, shakers, a catapult, drop towers, and impact test platforms (hail, stone, and small caliber fragments), we’re ready for anything. Our team of experts in EMC/EMI, environmental and dynamics testing serve the mid-Atlantic region performing the tests you need in a timely and cost-effective manner.

We have extensive experience in electromagnetic radiation and susceptibility testing, product safety, dynamics and environmental testing — to name just a few. With a mastery of current test and conformity requirements for domestic and international, we can assist you with product assessment and program test requirements to assure maximum customer acceptance.

Client Portal

NTS Labs - Lab Insight Client Login

Our team of over 9,000 Engaged Experts in North America, Europe, The Middle East, Australia, Asia and Africa are ready to help you.


Element Tinton Falls Specialties

EMI/EMC/ESD at Element Tinton Falls

Element Tinton Falls provides EMI/EMC/ESD testing services to a wide variety of industries with expertise in testing to Defense, Aerospace, Space, Consumer Electronics, Telecom, Medical Device and Automotive Industries.

Our EMI/EMC/ESD testing capabilities include:

• Radiated Susceptibility ~ 200 V/m, frequency range 10 kHz to 40 GHz,
• Radiated Emissions ~ 30 Hz to 40 GHz
• Two three-meter FCC listed, semi-anechoic chambers
• Two-meter semi-anechoic chambers
• MIL/AERO semi-anechoic chambers
• AC & Telecom port surge, Electrical Fast Transients, Ring-wave, and bust testing
• Electrical power characteristics testing
• Airborne acoustic noise and structure-borne noise
• Antenna characterization
• Shielding effectiveness, transfer impedance
• Electrostatic discharge up to 30 kV

Element Tinton Falls also provides certification of Telecommunications products to Network Equipment Building System requirements (NEBS) as well as international standards. We also provide complete certification of information technology, industrial, and other commercial electronic products to global EMC, and Product Safety regulatory standards.

Primary EMI / EMC testing specifications

GR 1089-CORE
FCC parts 15, 18, 22 & 24
EN 300386
EN 55024
EN 55022
EN 55011
EN 60601-1-2
EN 61000-4-xx
EN 61000-3-x
EN 61000-6-x
EN 61326-1

Dynamic & Climatic Simulation at Element Tinton Falls

Element Tinton Falls is a full-service environmental test facility capable of managing your dynamic and environmental simulation test programs, for Commercial and Military.

Our technicians and engineers are recognized experts in the performance of a wide array of environmental simulations including thermal, shock, and vibration to name a few. Capabilities include more than 15 different chambers, Shakers, Catapult, Drop Towers, Impact (hail, stone, and small caliber fragments) test platforms.

Dynamics Testing in Tinton Falls

Vibration capabilities include sine, random, sine on random, random on random, gunfire vibration and synthesized shock. Additional dynamic testing capabilities include hail and stone impact testing, acceleration testing, impact and drop and shock towers. NTS dynamics testing capabilities encompass:

• Electrodynamic shaker systems: T-1000, T-514; up to 1″ stroke, 9,000 – 16,000 force pounds, 5 Hz – 3,000 Hz.
• Catapult and drop towers: Up to 100msec, 55Gs
• Ballistics (hail/stone impact)

Primary specifications for dynamic testing include:
ETSI 300-019-xx
IEC 60068-2-xx.

Environmental Simulation Testing in Tinton Falls

Environmental testing performed by Element Tinton Falls is the answer to overcoming the risks involved when bringing a new product to market. To reduce costly reworking and even costlier product recalls, manufacturers smartly opt to test their prototypes for performance throughout their intended lifecycle.

In addition, our team members are always ready to share their expertise - so you get precisely the type of environmental tests your products need to be reliable and meet all relevant industry standards.

Our facility offers a variety of climatic chambers, including:
• Temperature/humidity chambers ranging in size from two cubic feet to 8’ x 8’ x 8’ walk-in chambers.
• Combined temperature, altitude and humidity chamber can reach up to is 90,000 feet.
• Acoustic noise
• Wind and rain up to 100 mph
• Salt fog
• Solar load
• Thermal shock
• Fluids susceptibility
• Sand and dust testing

Primary specifications for environmental testing include:
IEC 60529
NEMA 250
ETSI 300-019-xx
IEC 60068-2-xx

Fungus Testing

Tinton Falls is a USDA approved fungus lab with an on-staff mycologist. Our fungus resistance testing - also known as non-nutrient growth testing - is ideal for products intended for use in warm and humid climates. Since fungal growth is known to impede mechanical, electrical and optical functions - as well as pose certain infection and health risks - it is an imperative test to conduct. And with soil burial testing available, we offer wide-range fungal testing so there's no shortage of what we can test for you.

Our fungus testing services are designed to meet a myriad of US and European standards including:
MIL-STD-810 Method 508
RTCA-DO-160 Section 13
ASTM C1338 and other ASTM standards
SAE J1455
AATCC TM 30 Test I, Test II, Test III and Test IV
ANSI A136.1 Section 6.4
GM 9328P
IPC-TM-650 and other IPC test methods for circuit board materials
Whirlpool T331
Whirlpool TCP-126
JSS 55555
Tappi T487
IEC 60068-2-10
ISO 846
JSS 55555
SAE J1455
and other custom fungus tests.

Hail/Stone Impact Testing

When you consider the damage hail impact can cause to vital equipment like aircraft windshields, you understand the importance of hail/stone impact testing. At Element Tinton Falls, we have the capability of simulating real-world impacts that can occur at speeds in excess of 600 mph and at temperatures of -20°C or lower. In addition, our high-speed video system allows us to conduct all necessary fracture and failure analyses to aid in the robust design and development of your product.

Our hail/stone impact testing methods are designed to comply with ASTM F320, ASTM E822, ASTM E1038, FM 4470 and FM 4473 standards.

International Approvals and Certification

Getting your product into international markets can be difficult with geopolitical dynamics fundamentally impacting the type of markings you might need to get your product into a new country. Our team of experts is dedicated to helping you secure regulatory approval in global markets with a streamlined process designed to avoid delays and duplicative testing. Our international approval services include:

• A Single-Point-of-Contact for 180 Countries
• In-country Testing and Approvals
• Globally Recognized Test Reports
• In-Country Representation
• On-going Compliance Tracking
• Compliance Strategy for Faster Certification

Approvals, accreditations and documents

  • Tinton Falls A2LA Electrical ISO 17025 Certificate and Scope
    PDF - 481.51 KB View
  • Tinton Falls A2LA Mechanical ISO 17025 Certificate and Scope
    PDF - 531.58 KB View